Ring Joint Gasket (RTJ) Asme B16.20 in Pipe high pressure and high temperature wellhead according to API 6a asme16.20
Ring joint gaskets come in two basic types, an oval cross section and an octagonal cross section. These basic shapes are used in pressures up to 10,000 psi (64 MPa). The dimensions are standard- ized and require specially grooved flanges. The octagonal cross section has a higher sealing efficiency than the oval and would be the preferred gasket. However, only the oval cross section can be used in the old type round bottom groove. The newer flat bottom groove design will accept either the oval or the octagonal cross section. The sealing surfaces on the ring joint grooves must be smoothly finished to 63 micro inches and be free of objectionable ridges, tool or chatter marks. RTJ assemblies seal by an initial line contact or an edging action as the compressive forces are applied. The hardness of the ring should always be less than the hardness of the flanges to prevent flange deformation. Dimensions for standard ring joint gaskets and grooves are covered in ASME B16.20 and API 6A, API 17D and ASME B16.5/B16.20.
we supplies ring joint gaskets (RTJ Gasket) with the hardness numbers as follows:
||-60 to +400 °C
|Low carbon steel
||-40 to +500°C
|4%-6% Cr ½% Mo:F5
||-125 to +500°C
|Stainless steel 304/304L
||-250 to +650°C
||S304 or 304L
|Stainless steel 316/316L
||-196 to +800°C
||S316 or 316L
|Stainless steel 321
||-250 to +870°C
|Stainless steel 347
||-250 to +870°C
|Stainless steel 410
||-20 to +500°C
We specializes in ring joint gasket, including ring gasket in R, RX, BX, IX types, lens gasket, weld ring gasket and bonnet gasket(according to client's drawing). The metal gasket designed for use in high pressure, high temperature application necessitated the need for a high integrity seal. Our products are widely used in flat gate valve, Christmas tree, pipeline fittings, flange, high pressure vessel, oil &gas industry, wellhead assembly, petrochemical industry and the like.
We can offer more than 30 kinds of materials, such as 321SS, 347SS, 316SS, 304SS, Inconel 625, Monel 400, INCOLY 825, Nickel 200, Duplex F44, soft iron, low carbon steel and so on. We could produce the maximum outside diameter is 2500mm. We have over 10 years experience in export business. Our products are sold to Southeast Asia, Middle East, Europe and America and well appreciated by our clients.
Programming interface ring Joint gaskets come in two fundamental sorts, an oval cross segment and an octagonal cross segment. These essential shapes are utilized in pressures up to 10,000 Rubber Seals and Gasket. The measurements are institutionalized and require uniquely notched spines. The octagonal cross segment has a higher fixing proficiency than the oval and would be the favored gasket. Be that as it may, just the oval cross segment can be utilized in the old sort round base notch. The more up to date level base furrow configuration will acknowledge either the oval or the octagonal cross segment. The fixing surfaces on the ring joint sections must be easily completed to 63 smaller scale inches and to be liberated from shocking edges, apparatus or babble marks. They seal by an underlying line contact or an edging activity as the compressive powers are applied.
There’s a variety of material can be selected for a ring gasket according to a different application.
Check as below:
Soft Iron, Low Carbon Steel, Stainless Steel 304, Stainless Steel 304L, Stainless Steel 316, Stainless Steel 316L, Stainless Steel 321, Stainless Steel 347, Stainless Steel 410, Aluminum, Copper, Brass, Nickel 200, Monel 400, Inconel 600, Hastelloy B2, Titanium (see more information in our products catalog)
Ring joint gaskets are widely used in refinery, petrochemical and oil field drilling industries. and the rings are generally used for high pressure and high-temperature applications.
Q: Are you trading company or manufacturer ?
A: We are a professional production enterprise
Q: How long is your delivery time?
A: Generally it is 7-15 days for stock delivery, and 15-30 days for manufacturing goods , but it depands on the quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we can provide you sample, but you need to pay for the sample and freight firstly.We will return the fee after you make an order.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Q:How can we trust you to make a guaranteed deal?
A:We can trade through alibaba credit guarantee orders, which will fully guarantee the effective rights and interests of buyers and sellers.
A:For inner box and master carton are made as per international standards,and we can make special designed for you if need.
If you have another question, pls feel free to contact us.